描述
开 本: 16开纸 张: 胶版纸包 装: 平装是否套装: 否国际标准书号ISBN: 9787502198688
内容简介
《石油管工程重点实验室科研成果汇编(2012年)》汇编了中国石油集团石油管工程技术研究院和石油管工程重点实验室在2012年正式发表在国内外刊物上的论文以及实验室研究论文、获得的专利、各类获奖成果等，分为论文篇和成果篇，内容涉及输送管与完整性评价、油井管与管柱、腐蚀与防护等方面。《石油管工程重点实验室科研成果汇编(2012年)》内容丰富、专业性较强，可供从事石油管工程的技术人员和大专院校相关专业师生参考。
目 录
篇 论 文 篇
输送管与安全性评价
Effect of Cold Bending Process and Strain—age on Properties of X80 Linepipe
油气管道输送系统国际标准化
Application of Non—metallic Composite Pipes in Oilfields in China
Experimental Research on Fracture Toughness of High Grade Line Pipe
Analysis of Bending Test of 40in X70 Line Pipe
The Effect of Temper Temperature on Property and Microstructure of X80 Induction Bends
Comparison of BTC， RBTC and HLP Models in the Calculation of the Dynamic Ductile Fracture Propagation Velocities Based on the X80 Full—scale Burst Test
高钢级管线钢中大型夹杂物特性研究
Strain—hardening Capacity and Microstructure Analysis of X70 High Strain Line Pipe
Investigation on Buckling of High Strain Line Pipe
X100级管线钢塑性变形行为研究
Low Circle Fatigue Behavior of X80 High—strain Line Pipe
Effect of Prestrain and Aging on Mechanical Properties of X100 Pipeline Steels
X100管线钢SH—CCT曲线测定及分析
基于不同评价准则的含腐蚀缺陷管道概率评价方法研究
X60／L415直缝埋弧焊管内壁纵裂失效浅析
Fire Incident Hazard Analysis on Wellhead Rupture of Underground Salt Cavern Gas Storage
基于管道屈服强度的X80钢管100%SMYS静水压试验可行性研究
φ660mm×7.1mm屈曲钢管变形原因分析
沙漠地区输油管道内腐蚀开挖检测与评价
The Method for Life Evaluation of Internal Coating of In—service Pipeline Based on Fuzzy Theory
Effect of Graphite Target Current on the Microstructure and Tribological Performance of Magnetron Sputtering CrTiAICN Coating
基于NI PXI—E平台的石油管复合挤毁试验机控制与数据采集系统搭建
Analysis of Fatigue Reliability Life of X80 Pipeline
L360QB／316L复合管埋弧焊环焊缝接头组织与性能研究
A Simple Analytical Method for the Determination of Manganese in Welded Joint and Pipe Body of Xloo Grade SAWH＆SAWL Pipe for Gas Pipeline Transportation Systems
SEM In—situ Observation on Influence of Characteristic Inclusion Parameters on Crack Initiation and Propagation in X80 Pipeline Steel Under Tensile Load
Failure Analysis of ERW Seam Weld Pipeline in Internal Pressure
Structures and Properties of X80 Pipeline Girth Welds for Different Welding Procedures
大壁厚高钢级管线钢落锤撕裂试验断口分析
Welding of 2205 Duplex Stainless Steel Pipes
服役中管道焊接热影响区的临界硬度
X120管线钢管爆破试验与有限元分析
X80焊管断裂韧性的评价：热影响区的力学性能实验分析
验证试验法对X80钢级大口径三通设计的研究
Rp0.2代替RT0.5进行管线钢屈服强度测量的可行性研究
3PE涂敷速度与环氧粉末胶化时间和固化时间的关系
采用切环弹复量评价螺旋缝埋弧焊管残余应力的合理性分析
X70螺旋缝焊管焊缝横向裂纹分析
埋弧焊接钢管焊缝边缘母材夹杂物的分析与判别
HFW焊缝结构参数对其冲击韧性的影响
Microstructure and Mechanical Properties of Al2O3／NiAl In—situ Composites by Hot—press— aided Reaction Synthesis
离心浇铸挤压复合管性能分析
Cr12MoV膨胀锥在管材膨胀试验中的应用
油井管与管柱
On Improving the Accuracy of Prediction of the Down—hole Drag&Torque in Extended Reach Drilling （ERD）
Effects of Thermal Exposure on the Mechanical Properties and Microstructure Stability of an Al—Cu—Mg—Ag Alloy
A Repeated Impact Method and Instrument to Evaluate the Impact Fatigue Property of Drill Pipe
酸性油气田开发用钻杆关键技术指标研究
直缝电阻焊套管检验中的几个问题
套管失效分析及其失效控制技术
Study on the Flow Stress of the High—Mn Austenitic Steel During Hot Deformation
外压作用对特殊螺纹接头内压密封性影响分析
N80外加厚油管断裂失效分析
Fracture Failure Analysis of φ127mm G105 Drill Pipe
非API油管密封面损伤原因分析
Simulation on Stress Distribution of drill Pipe’s Surface Initial Crack
Analysis of Tubing Collapse Accident During the Operation of Blending Light Dropping Viscosity
Two Typical Cases Analysis of Casing Connection Pullout
回火温度对抗硫钻杆钢析出相形貌及力学性能的影响
抗硫套管的成分与性能分析
油管螺纹基础参数与黏扣相关性分析
Explanation of Doubtful Points of API Round Thread Casing and Coupling Thread Standoff
φ139.7mm×7.72mm J55 LC套管脱落失效分析
含缺陷套管强度分析
The Field Inspection and Research of Related Problems about a Kind of Non—API Thread Connections
HY级抽油杆质量分析
P110石油套管外表面缺陷分析
XGC1特殊螺纹接头螺纹刀具的研究
钻杆失效预防措施探讨
气井用套管螺纹接头失效分析
N800石油套管热轧缺陷分析
镍基合金油管加工及质量控制
Failure Analysis for Burst of the High Temperature Steam Pipe
Experimental and Numerical Study of Drill Pipe Erosion Wear in Gas Drilling
Mechanism and Prediction Analysis of Sustained Casing Pressure in “A” Annulus of CO2 Injection Well
Numerical Simulation of Lined Steel Pipe Hydro—Forming Process
Casing and Tubing Design for Sour Oil and Gas Fields
腐蚀与防护
高温高压海水中油气田用缓蚀剂的筛选与评价
Investigation on the Influence of Precipitated Phase on Corrosion Resistance of the Ni—based Alloys
集输管道内腐蚀评价方法基本原理与方法
Corrosion Reason Analysis of Ground Gathering Pipelines in High Flow—rate Gas Condensate Field
The Corrosion Behavior of Electroless Ni—P Coating in Cl— ／H2S Environment
Influence of Stray Alternating Current on Corrosion Behavior of Pipeline Steel in Near—neutral pH Carbonate／Bicarbonate Solution
Failure Analysis of Fractured 31／2in PllOSS Tubing
一种咪唑啉缓蚀剂对油田P110钢CO2腐蚀的缓蚀行为研究
Corrosion Resistance of E6—glass Fibre in Simulated Oilfield Environments
矿浆输送钢管耐冲蚀磨损性能研究综述
稠油埋地单井管线新型防腐保温结构
高密度聚乙烯外护保温管的开裂原因
储罐内底板牺牲阳极阴极保护电流分布的有限元模拟
复合阻垢剂PASP—ATMP的协同效应及影响因素研究
Cl—浓度对316L不锈钢点蚀行为的影响
CO2凝析气田碳钢管道穿孔失效分析
CO2气田用X65管线钢焊缝的电化学腐蚀行为研究
其 他
火花源原子发射光谱法测定高镍耐蚀合金中13种元素
API Spec 5CT进展及主要技术内容变化
Applied Research of the Flexible Epoxy Resin Curing Agent
……
第二篇 成 果 篇
输送管与安全性评价
Effect of Cold Bending Process and Strain—age on Properties of X80 Linepipe
油气管道输送系统国际标准化
Application of Non—metallic Composite Pipes in Oilfields in China
Experimental Research on Fracture Toughness of High Grade Line Pipe
Analysis of Bending Test of 40in X70 Line Pipe
The Effect of Temper Temperature on Property and Microstructure of X80 Induction Bends
Comparison of BTC， RBTC and HLP Models in the Calculation of the Dynamic Ductile Fracture Propagation Velocities Based on the X80 Full—scale Burst Test
高钢级管线钢中大型夹杂物特性研究
Strain—hardening Capacity and Microstructure Analysis of X70 High Strain Line Pipe
Investigation on Buckling of High Strain Line Pipe
X100级管线钢塑性变形行为研究
Low Circle Fatigue Behavior of X80 High—strain Line Pipe
Effect of Prestrain and Aging on Mechanical Properties of X100 Pipeline Steels
X100管线钢SH—CCT曲线测定及分析
基于不同评价准则的含腐蚀缺陷管道概率评价方法研究
X60／L415直缝埋弧焊管内壁纵裂失效浅析
Fire Incident Hazard Analysis on Wellhead Rupture of Underground Salt Cavern Gas Storage
基于管道屈服强度的X80钢管100%SMYS静水压试验可行性研究
φ660mm×7.1mm屈曲钢管变形原因分析
沙漠地区输油管道内腐蚀开挖检测与评价
The Method for Life Evaluation of Internal Coating of In—service Pipeline Based on Fuzzy Theory
Effect of Graphite Target Current on the Microstructure and Tribological Performance of Magnetron Sputtering CrTiAICN Coating
基于NI PXI—E平台的石油管复合挤毁试验机控制与数据采集系统搭建
Analysis of Fatigue Reliability Life of X80 Pipeline
L360QB／316L复合管埋弧焊环焊缝接头组织与性能研究
A Simple Analytical Method for the Determination of Manganese in Welded Joint and Pipe Body of Xloo Grade SAWH＆SAWL Pipe for Gas Pipeline Transportation Systems
SEM In—situ Observation on Influence of Characteristic Inclusion Parameters on Crack Initiation and Propagation in X80 Pipeline Steel Under Tensile Load
Failure Analysis of ERW Seam Weld Pipeline in Internal Pressure
Structures and Properties of X80 Pipeline Girth Welds for Different Welding Procedures
大壁厚高钢级管线钢落锤撕裂试验断口分析
Welding of 2205 Duplex Stainless Steel Pipes
服役中管道焊接热影响区的临界硬度
X120管线钢管爆破试验与有限元分析
X80焊管断裂韧性的评价：热影响区的力学性能实验分析
验证试验法对X80钢级大口径三通设计的研究
Rp0.2代替RT0.5进行管线钢屈服强度测量的可行性研究
3PE涂敷速度与环氧粉末胶化时间和固化时间的关系
采用切环弹复量评价螺旋缝埋弧焊管残余应力的合理性分析
X70螺旋缝焊管焊缝横向裂纹分析
埋弧焊接钢管焊缝边缘母材夹杂物的分析与判别
HFW焊缝结构参数对其冲击韧性的影响
Microstructure and Mechanical Properties of Al2O3／NiAl In—situ Composites by Hot—press— aided Reaction Synthesis
离心浇铸挤压复合管性能分析
Cr12MoV膨胀锥在管材膨胀试验中的应用
油井管与管柱
On Improving the Accuracy of Prediction of the Down—hole Drag&Torque in Extended Reach Drilling （ERD）
Effects of Thermal Exposure on the Mechanical Properties and Microstructure Stability of an Al—Cu—Mg—Ag Alloy
A Repeated Impact Method and Instrument to Evaluate the Impact Fatigue Property of Drill Pipe
酸性油气田开发用钻杆关键技术指标研究
直缝电阻焊套管检验中的几个问题
套管失效分析及其失效控制技术
Study on the Flow Stress of the High—Mn Austenitic Steel During Hot Deformation
外压作用对特殊螺纹接头内压密封性影响分析
N80外加厚油管断裂失效分析
Fracture Failure Analysis of φ127mm G105 Drill Pipe
非API油管密封面损伤原因分析
Simulation on Stress Distribution of drill Pipe’s Surface Initial Crack
Analysis of Tubing Collapse Accident During the Operation of Blending Light Dropping Viscosity
Two Typical Cases Analysis of Casing Connection Pullout
回火温度对抗硫钻杆钢析出相形貌及力学性能的影响
抗硫套管的成分与性能分析
油管螺纹基础参数与黏扣相关性分析
Explanation of Doubtful Points of API Round Thread Casing and Coupling Thread Standoff
φ139.7mm×7.72mm J55 LC套管脱落失效分析
含缺陷套管强度分析
The Field Inspection and Research of Related Problems about a Kind of Non—API Thread Connections
HY级抽油杆质量分析
P110石油套管外表面缺陷分析
XGC1特殊螺纹接头螺纹刀具的研究
钻杆失效预防措施探讨
气井用套管螺纹接头失效分析
N800石油套管热轧缺陷分析
镍基合金油管加工及质量控制
Failure Analysis for Burst of the High Temperature Steam Pipe
Experimental and Numerical Study of Drill Pipe Erosion Wear in Gas Drilling
Mechanism and Prediction Analysis of Sustained Casing Pressure in “A” Annulus of CO2 Injection Well
Numerical Simulation of Lined Steel Pipe Hydro—Forming Process
Casing and Tubing Design for Sour Oil and Gas Fields
腐蚀与防护
高温高压海水中油气田用缓蚀剂的筛选与评价
Investigation on the Influence of Precipitated Phase on Corrosion Resistance of the Ni—based Alloys
集输管道内腐蚀评价方法基本原理与方法
Corrosion Reason Analysis of Ground Gathering Pipelines in High Flow—rate Gas Condensate Field
The Corrosion Behavior of Electroless Ni—P Coating in Cl— ／H2S Environment
Influence of Stray Alternating Current on Corrosion Behavior of Pipeline Steel in Near—neutral pH Carbonate／Bicarbonate Solution
Failure Analysis of Fractured 31／2in PllOSS Tubing
一种咪唑啉缓蚀剂对油田P110钢CO2腐蚀的缓蚀行为研究
Corrosion Resistance of E6—glass Fibre in Simulated Oilfield Environments
矿浆输送钢管耐冲蚀磨损性能研究综述
稠油埋地单井管线新型防腐保温结构
高密度聚乙烯外护保温管的开裂原因
储罐内底板牺牲阳极阴极保护电流分布的有限元模拟
复合阻垢剂PASP—ATMP的协同效应及影响因素研究
Cl—浓度对316L不锈钢点蚀行为的影响
CO2凝析气田碳钢管道穿孔失效分析
CO2气田用X65管线钢焊缝的电化学腐蚀行为研究
其 他
火花源原子发射光谱法测定高镍耐蚀合金中13种元素
API Spec 5CT进展及主要技术内容变化
Applied Research of the Flexible Epoxy Resin Curing Agent
……
第二篇 成 果 篇
评论
还没有评论。